Cambium Networks cnMatrix EX2028 Handleiding (320 Pagina's)

Handleiding

/ 320

Je bekijkt pagina 176 van 320

L3 Features 176

l

ICMP mask reply option is enabled by default.

l

Path MTU discovery is disabled by default.

Prerequisites

l

N/A

How to enable IP Routing in CLI Interface

1. Type the config terminal command into the terminal. Press the Enter key.

2. Type the vlan 10 command into the terminalto go to the configuration VLAN mode. Press the

Enter key.

3. Type the ports add gigabitethernet 0/1-5 untagged all command into the terminal to configure the

port list for the selected VLAN. Press the Enterkey.

4. Type the exit command into the terminal to go back to the configuration mode. Press the Enter

key.

5. Type the interface range gigabitethernet 0/1-5 command into the terminal to select the range of

Layer 2 interfaces to be configured and to go to the configure interface range mode. Press the

Enter key.

6. Type the switchport pvid 10 command into the terminal to set pvid for the port. Press the Enter

key.

/ 320

Bekijk gratis de handleiding van Cambium Networks cnMatrix EX2028, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.