Cambium Networks cnMatrix EX2028 Handleiding (320 Pagina's)

Handleiding

/ 320

Je bekijkt pagina 170 van 320

L3 Features 170

Network Diagram

How to Enable DHCP Relay in CLI Interface

1. Type the config terminal command into the terminal. Press theEnter key.

2. Type the service dhcp-relay command into the terminal to enable DHCP Relay Agent. Press the

Enter key.

3. Type the ip dhcp server 10.100.100.10 command into the terminal to set an IP address for the

DHCP server. Press the Enter key.

4. Type the end command into the terminal to go to the Privileged EXEC mode. Press the Enterkey.

5. Type the show ip dhcp relay information command into the terminal to display the DHCP Relay

Agentconfiguration (verify if the status for the DHCP Relay feature is enabled). Press the

Enterkey.

6. For more information, see DHCP Relay Parameters and Commands.

/ 320

Bekijk gratis de handleiding van Cambium Networks cnMatrix EX2028, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.