Cambium Networks cnMatrix EX2028 Handleiding (320 Pagina's)

Handleiding

/ 320

Je bekijkt pagina 159 van 320

L2 Features 159

1. Type the configure terminal command into the terminal. Press the Enterkey.

2. Type the vlan 100 command into the terminal to configure vlan 100. Press the Enter key.

3. Type the no ip arp inspection command into the terminal to disable DAI on the selected VLAN.

Press the Enter key.

4. Type the end command into the terminal to go to the Privileged EXEC mode. Press the Enter key.

5. Type the show ip arp inspection vlan 100 command into the terminal to display the DAI status for

vlan 100 (verify if the DAI information for the selected VLAN is still displayed). Press the Enter key.

For more information, see Dynamic ARP Inspection Parameters and Commands.

Configuring the DAI Trust State on an Interface in CLI Interface

1. Type the configure terminal command into the terminal. Press the Enterkey.

2. Type the interface gigabitethernet 0/4 command into the terminal to select an interface to be

configured. Press the Enter key.

3. Type the ip arp inspection trust command into the terminal to configure the interface as a trusted

port. Press the Enter key.

4. Type the end command into the terminal to go to the Privileged EXEC mode. Press the Enter key.

5. Type the show ip arp inspection trust-state command into the terminal to display the DAI trust

state for all the physical interfaces (verify if gi0/4is set as trusted). Press the Enter key.

For more information, see Dynamic ARP Inspection Parameters and Commands.

/ 320

Bekijk gratis de handleiding van Cambium Networks cnMatrix EX2028, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.