Cambium Networks cnMatrix EX2028 handleiding
Handleiding
Je bekijkt pagina 110 van 320
L2 Features 110
How to start a Cable Diagnostics test
1. Connect the test cable to the cnMatrix interface 0/5. The other end of the test cable must also be
connected to a network device.
2. Type the configure terminal command into the terminal. Press the Enter key.
3. Type the cable-diagnostics test interface gigabitethernet 0/5 command into the terminal to start
the test. Press the Enter key.
4. Read the Warning message. If you want to continue type y, yes, Y or YES into the terminal.
5. Type the show cable-diagnostics interface gigabitethernet 0/5 command into the terminal to
display cable diagnostics test results. Press the Enter key.
Note
The Warning message can be overridden by using the force parameter at the end of
the command.
Example: cnMatrix(config)# cable-diagnostics test interface gigabitethernet 0/5
force.
Troubleshooting Cable Diagnostics
Useful command for troubleshooting:
l
cnMatrix# show cable-diagnostics
Storm Control
Managing Storm Control
Feature Overview
Bekijk gratis de handleiding van Cambium Networks cnMatrix EX2028, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cambium Networks |
| Model | cnMatrix EX2028 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 32421 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Gewicht | 2770 g |
| Breedte | 440 mm |
| Diepte | 209 mm |
| Hoogte | 44 mm |
