Cambium Networks cnMatrix EX2010 Handleiding (320 Pagina's)

Handleiding

/ 320

Je bekijkt pagina 17 van 320

Getting Started 17

Command

Mode

Access Method Prompt Exit Command

exit command is used

and to exit to the

Privileged EXEC

mode the end

command is used.

MSTP

Configuration

Mode

In the Global Configuration mode, type the

spanning-tree mst configuration command to

enter the MSTP Configuration mode.

cnMatrix

(config-

mst)#

To exit to the Global

Configuration mode

the

exit command is used

and to exit to the

Privileged EXEC

mode the end

command is used.

Basic Switch Configuration in CLI Interface

Configuring CLI and cnMaestro

Accessing CLI Interface (examples)

Accessing CLIInterfaceUsing SSH

1. Open PuTTY application.

2. In the PuTTY Configuration window, select SSH in the Connection type section.

3. On the PuTTY Configuration window, in the Host Name field, enter 192.168.0.1 as IP address and in

the Port field, enter 22 port as value.

4. Click Open. The login prompt is displayed.

5. In the cnMatrix login prompt enter the default username: admin.

6. In the Password prompt enter the default login password: admin.

Accessing CLI Interface Using SerialPort

1. Connect the console cable to PC and to console port on the switch.

2. Open PuTTY application.

3. In the PuTTY Configuration window, selectSerial in the Connection type section.

4. In the Serial line section, enter the name of the serial connection.

5. In the Speed section, enter 115200 as speed value.

6. Click Open. The login prompt is displayed.

/ 320

Bekijk gratis de handleiding van Cambium Networks cnMatrix EX2010, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.