Cambium Networks cnMatrix EX2010-P Handleiding (320 Pagina's)

Handleiding

/ 320

Je bekijkt pagina 82 van 320

L2 Features 82

3. Type the set sntp unicast-server ipv4 10.2.109.2 command into the terminal to configure SNTP

unicast server. Press the Enter key.

4. Type the set sntp client addressing-mode unicast command into the terminal to set the addressing

mode of the SNTP client as unicast. Press the Enter key.

5. Type the set sntp client enable command into the terminal to enable the SNTP client module. Press

the Enterkey.

6. Type the exit command into the terminal to go back to the global configuration mode. Press the

Enter key.

7. Type the clock time source ntp command into the terminal to configure the time source for the

primary clock. Press the Enter key.

8. Type the end command into the terminal to go back to the Privileged EXEC mode. Press the Enter

key.

9. Type the show clock command into the terminal to display the system clock. Press the Enter key.

For more information, see SNTP Parameters and Commands.

Configure time-zone and day-light saving

1. Type the config terminal command into the terminal. Press the Enter key.

2. Type the clock timezone PST -8 command into the terminal to configure the standard timezone.

Press the Enter key.

3. Type the clock summer-time PDT recurring 2 sunday march 02:00 first sunday november 02:00

60 command into the terminal to configure the day-light saving time. Press the Enter key.

4. Type the end command into the terminal to go back to the Privileged EXEC mode. Press the Enter

key.

5. Type the show clock detail command into the terminal to display the system clock. Press the Enter

key.

Configure time-zone and day-light saving

1. Type the config terminal command into the terminal. Press the Enter key.

2. Type the clock timezone PST -8 command into the terminal to configure the standard timezone.

Press the Enter key.

3. Type the clock summer-time PDT recurring 2 sunday march 02:00 first sunday november 02:00

60 command into the terminal to configure the day-light saving time. Press the Enter key.

4. Type the end command into the terminal to go back to the Privileged EXEC mode. Press the Enter

key.

5. Type the show clock detail command into the terminal to display the system clock. Press the Enter

key.

/ 320

Bekijk gratis de handleiding van Cambium Networks cnMatrix EX2010-P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.