Cambium Networks cnMatrix EX2010-P Handleiding (320 Pagina's)

Handleiding

/ 320

Je bekijkt pagina 48 van 320

L2 Features 48

1. Type the configure terminal command into the terminal. Press the Enterkey.

2. Type the spanning-tree mode mst command into theterminal to enable the MSTP feature. Press

the Enterkey.

3. Type the spanning-tree mst configuration command into theterminal to enter the MSTP mode.

Press the Enterkey.

4. Type the instance 1 vlan 10 command into theterminal to assign VLAN 10 in instance 1. Press the

Enter key.

5. Type the instance 2 vlan 11 command into theterminal to assign VLAN 11 in instance 2. Press the

Enter key.

6. Type the exit command into the terminal to go back to the global configuration mode. Press the

Enter key

7. Type the spanning-tree mst instance-id 1 root primary command into theterminal to configure the

root switch for instance 1. Press the Enter key.

8. Type thespanning-tree mst instance-id 2 root secondary command into theterminal to configure

a secondary root switch for instance 2. Press the Enterkey.

9. Type the interface gigabitethernet 0/1 command into terminal. Press the Enterkey.

10. Enter spanning-tree mst 1 port-priority 0into the field to configure the port priority for instance 1.

Press the Enterkey.

11. Type the spanning-tree mst 2 cost 500000 command into the field to configure the cost value

associated with the port.Press the Enterkey.

12. Type the exit command into the terminal to go back to the global configuration mode. Pressthe

Enter key

13. Type the spanning-tree mst forward-time 30 command into terminal to configure the forwarding-

delay time. Press the Enter key.

14. Type the spanning-tree mst max-age 30 command into theterminal to configure the max-age

time. Press the Enter key.

15. Type the spanning-tree mst max-hops 10 command into theterminal to configure the maximum-

hop count. Press the Enter key.

16. Type the spanning-tree mst max-instance 5 command into theterminal to configure the maximum

instance. Press the Enter key.

17. Type the interface gigabitethernet 0/1 command into theterminal to select an interface to be

configured. Press the Enter key.

18. Type the spanning-tree link-type point-to-point command into theterminal to specify the link type

to ensure rapid transitions. Press the Enter key.

19. Type the spanning-tree link-type shared command into theterminal to specify the link type (does

not ensure rapid transitions). Press the Enter key.

/ 320

Bekijk gratis de handleiding van Cambium Networks cnMatrix EX2010-P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.