Cambium Networks cnMatrix EX2010-P handleiding

Niet gecategoriseerd

Cambium Networks

320 pagina's

PDF beschikbaar

Handleiding

/ 320

Je bekijkt pagina 43 van 320

L2 Features 43

1. Type the configure terminal command into the terminal. Press the Enterkey.

2. Type the vlan 1 command into the terminal to configure a VLAN. Press the Enterkey.

3. Type the ports add gigabitethernet 0/4 command into theterminal to configure the port list for

the selected VLAN. Press the Enterkey.

4. Type the exit commandinto the terminal to go back to the global configuration mode. Press the

Enterkey.

5. Type the spanning-tree mode rst command into theterminal to enable the rstp mode. Press the

Enterkey.

6. Type the spanning-tree priority 4096 command into theterminal to configure the bridge priority

value. Press the Enterkey.

7. Type the interface gigabitethernet 0/1 command into the terminal to select an interface to be

configured. Press the Enterkey.

8. Type the spanning-tree port-priority 144 command into theterminal to configure the port priority

value. Press the Enterkey.

9. Type the exitcommand into the terminal to go back to the global configuration mode. Press the

Enterkey

10. Type the spanning-tree forward-time 30 command into theterminal to configure the forwarding-

delay time. Press the Enterkey.

11. Type the spanning-tree max-age 30 command into theterminal to configure the spanning tree

timers. Press the Enterkey.

12. Type the spanning-tree flush-indication-threshold 10 command into theterminal to configure the

flush indications that go before the flush trigger timer method.Press the Enterkey.

13. Type the spanning-tree flush-interval 500 command into the terminal to configure the time in

which the flush indications will be optimized. Press the Enterkey.

14. Type the spanning-tree compatibility stp command into theterminal to configure the

compatibility version for the spanning tree protocol. Press the Enter key.

15. Type the spanning-tree compatibility rst command into theterminal to configure the compatibility

version for the spanning tree protocol. Press the Enter key.

16. Type the interface gigabitethernet 0/4 command into theterminal to select an interface to be

configured. Press the Enter key.

17. Type the spanning-tree link-type point-to-point command into theterminal to specify the link type

for a rapid transition. Press the Enterkey.

18. Type the spanning-tree link-type shared commandinto the terminal. Press the Enter key.

19. Type the end command into the terminal to go back to the Privileged EXEC mode. Press the

Enterkey.

/ 320

Bekijk gratis de handleiding van Cambium Networks cnMatrix EX2010-P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.