Cambium Networks cnMatrix EX2010-P handleiding
Handleiding
Je bekijkt pagina 141 van 320

L2 Features 141
PBA TLV processing.
l
Release 4.1
l
Dynamic Actions
l
The LLDP Automatic Device Recovery (ADR) support initiates a PoE power toggle
when a connected device's LLDP data expires. ADR must be enabled on a per-port
basis. This setting can be dynamically controlled by PBA through the Automatic
Device Recovery action.
l
Release 4.2
l
Dynamic Actions
l
Automated VoIP support
l
With the introduction of the Automatic VoIP Configuration PBA action option,
standard PBA operation can be used to identify connected VoIP devices and
configure voice-related settings. When a PBA action is created/updated and
the Automatic VoIP Configuration (Auto-VoIP) option is enabled, certain
action options are automatically updated based on the current global voice
VLAN settings:
a. VLAN list – contains the voice VLAN and the data VLAN (if defined).
b. Native VLAN – set based on the voice/data VLAN tagging status.
c. Switch Port Mode – VoIP device ports are configured as Hybrid.
d. QoS Trust – VoIP device ports are configured as ‘dot1p’ trusted.
e. Uplink list – contains the voice VLAN uplink interface (if defined).
l
If the user configures a value for any of these options, the value is overwritten
based on the current global voice VLAN settings or the required VoIP device
port setting:
% Warning: Auto-VoIP PBA actions use global voice VLAN settings
l
All other PBA options may be specified (based on platform applicability). A
PBA Auto-VoIP policy (i.e., a PBA policy that references a PBA action with
Auto-VoIP configuration enabled) is considered non-applicable/not-ready if
the required global voice VLAN settings (i.e., the designated voice VLAN) are
not defined.
l
Previous releases restricted changes to settings that were temporarily under PBA
control. These restrictions have been relaxed allowing dynamic settings to be
updated by user configuration. Depending on the settings being updated, applied
PBA policies may need to be reapplied to ensure the integrity of the configuration
data.
l
Release 4.4
Bekijk gratis de handleiding van Cambium Networks cnMatrix EX2010-P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cambium Networks |
| Model | cnMatrix EX2010-P |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 32421 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Gewicht | 1600 g |
| Breedte | 250 mm |
| Diepte | 210 mm |
| Hoogte | 44 mm |


