Cambium Networks cnMatrix EX2010-P handleiding

Niet gecategoriseerd

Cambium Networks

320 pagina's

PDF beschikbaar

Handleiding

/ 320

Je bekijkt pagina 139 van 320

L2 Features 139

The VLAN membership update for uplink ports action, introduced in the 2.1

release, allows the user to identify uplinks on a per-action basis. This support

is also required for policies that are created dynamically, such as Auto-VLAN

policies, and for those that include embedded action criteria.

The global uplink definition setting has the same semantics as the per-

action uplink setting. The administrator can identify up to four device

ports to act as PBA uplinks. VLANs (newly created or existing) that are

applied to the port on which the matching device was detected are also

associated with the uplink ports. The VLAN membership update

remains in effect while the related PBA policy is active.

Uplink ports must be operating in hybrid switch port mode to be valid.

Uplinks are identified using the interface type and slot/port naming

convention (e.g., ‘Gi0/5,Ex0/1’). Uplink data is only processed if the

associated policy includes VLAN data for port membership updates.

Otherwise it is silently ignored.

Per-action uplink data takes precedence over global (default) uplink

data. When a PBA policy is installed, if action uplink data isn’t defined

and global uplink data is defined, the global data is used to identify

uplinks for dynamic VLAN membership. If both per-action and global

uplink data is specified, the per-action uplink data is used.

Global uplink data is defined using the top-level ‘auto-attach uplink’ CLI

command and through the Web Auto-Attach Basic Settings page.

PBA Monitoring/Configuration

XMS-Cloud support is available for PBA monitoring and configuration starting

with the XMS 10.3 release.

Release 4.0

Device Identification

PBA Rule Combination support allows multiple distinct rules to be treated as a

single unit during PBA policy evaluation. If a policy references a rule

combination name (versus using rule criteria embedded in the policy itself)

and not an individual rule name, the device matching criteria from all of the

rule combination members is used when determining if the policy should be

applied.

When defining a PBA rule, a rule combination name can be specified as

well. The rule combination name is optional and no rule combination

name (empty string) is the default value (i.e., no change from current

operation). Rules that have the same rule combination name are

considered members of the same rule combination.

Rule combination membership can be modified at any time, even if the

rule combination criteria is being used by an active policy (i.e., a policy

that is currently applied to a port). During evaluation of rules in a rule

/ 320

Bekijk gratis de handleiding van Cambium Networks cnMatrix EX2010-P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.