Cambium Networks cnMatrix EX2010-P Handleiding (320 Pagina's)

Handleiding

/ 320

Je bekijkt pagina 120 van 320

L2 Features 120

Ingress Metering with ACL + Enable Metering(QoS)

1. Type the config terminal command into the terminal. Press the Enterkey.

2. Type the ip access-list extended 1002 command into the terminal to create an IP access-list. Press

the Enterkey.

3. Type the permit udp any any range 60000 65535 command into the terminal to specify the UDP

port rangeof the packets to beallowed. Press the Enterkey.

4. Type the exit command into the terminal to go back to the configuration mode. Press the

Enterkey.

5. Type the interface gi 0/1 command into the terminal to select the interface to be configured. Press

the Enterkey.

6. Type the ip access-group 1002 in command into the terminal to enable IP ACL on the interface.

Press the Enterkey.

7. Type the exit command into the terminal to go back to the configuration mode. Press the

Enterkey.

8. Type the meter 1 command into the terminal to create a meter and to go to the configuration-

meter mode. Press the Enterkey.

9. Type the meter-type srTCM cir 100000 cbs 4096 ebs 0 command into the terminal to set the

meter type as single rate three color marker metering and the committed information size as

100000, the committed burst size as 4096 and the excess burst size as 0. Press the Enterkey.

/ 320

Bekijk gratis de handleiding van Cambium Networks cnMatrix EX2010-P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.