Cambium Networks cnMatrix EX2010-P Handleiding (320 Pagina's)

Handleiding

/ 320

Je bekijkt pagina 116 van 320

L2 Features 116

6. Type the ip access-group 1001 in command into the terminal to apply ACL on inbound packets.

Press the Enterkey.

7. Type the exit command into the terminal to go back to the configuration mode. Press the

Enterkey.

8. Type the class-map 11 command into the terminal to add a class map entry. Press the Enterkey.

9. Type the match access-group ip-access-list 1001 command into the terminal to set the L3 class

map ID. Press the Enterkey.

10. Type the set class 11 command into the terminal to set class. Press the Enterkey.

11. Type the exit command into the terminal to go back to the configuration mode. Press the Enter

key.

12. Type the policy-map 11 command into the terminal to create a policy map. Press the Enterkey.

13. Type the set policy class 11 default-priority-type dot1P 7 0 command into the terminal. Press the

Enterkey.

14. Type the end command into the terminal to go to the Privileged EXEC mode. Press the Enterkey.

15. Type the show access-lists ip 1001 command into the terminal to display the access lists

configuration. Press the Enterkey.

16. Type the show class-map 11 command into the terminal to display the QoS class map entries. Press

the Enter key.

17. Type the show policy-map 11 command into the terminal to display the QoS policy map entries.

/ 320

Bekijk gratis de handleiding van Cambium Networks cnMatrix EX2010-P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.