Cambium Networks cnMatrix EX2010-P handleiding
Handleiding
Je bekijkt pagina 115 van 320

L2 Features 115
8. Type the exit command into the terminal to go back to the configuration mode. Press the
Enterkey.
9. Type the policy-map 10 command into the terminal to create a policy map. Press the Enterkey.
10. Type the set policy class 10 command into the terminal to set class for policy. Press the Enterkey.
11. Type the end command into the terminal to go to the Privileged EXEC mode. Press the Enterkey.
12. Type the show priority-map 10 command into the terminal to display the priority map entries.
Press the Enterkey.
For more information, see QoS Parameters and Commands.
Remarking with ACL (QoS)
1. Type the config terminal command into theterminal. Press the Enterkey.
2. Type the ip access-list extended 1001 command into the terminal. Press the Enterkey.
3. Type the permit tcp any any eq 443 command into the terminal to specify the TCP packets to
forward based on the associated parameters. Press the Enterkey.
4. Type the exit command into the terminal to go back to the configuration mode.Press the
Enterkey.
5. Type the interface gi 0/1 command into the terminal to specify the interface to be configured.
Press theEnterkey.
Bekijk gratis de handleiding van Cambium Networks cnMatrix EX2010-P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cambium Networks |
| Model | cnMatrix EX2010-P |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 32421 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Gewicht | 1600 g |
| Breedte | 250 mm |
| Diepte | 210 mm |
| Hoogte | 44 mm |


