Cambium Networks cnMatrix EX2010-P Handleiding (320 Pagina's)

Handleiding

/ 320

Je bekijkt pagina 107 van 320

L2 Features 107

l

Cannot be an EtherChannel group.

Source port:

l

Cannot be a destination port.

l

On a given port, only traffic on the monitored VLAN is sent to the destination port.

l

Can be in the same or different VLANs.

Configuring Port Mirroring - Port Based in CLI Interface (Example)

1. Type the config terminal command into the terminal. Press the Enter key.

2. Type the monitor session 1 source interface gigabitethernet 0/3 tx command into the terminal to

configure the source for the mirroring session. Press the Enterkey.

3. Type the monitor session 1 destination interface gigabitethernet 0/4 command into the terminal to

configure the source for the mirroring session. Press the Enterkey.

4. Type the end command into theterminal to go back to the Privileged EXEC mode. Press the Enter

key.

5. Type the show monitor session 1 command into the terminal to display the mirroring information.

Press the Enter key.

For more information, see Port Mirroring Parameters and Commands.

/ 320

Bekijk gratis de handleiding van Cambium Networks cnMatrix EX2010-P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.