Calor Pure Force DT8720C0 handleiding
Handleiding
Je bekijkt pagina 40 van 45
75
74
PROBLEMS POSSIBLE CAUSES SOLUTIONS
There is no
steam.
The appliance is not plugged
in, or not switched on.
Check that your appliance
is correctly plugged in and
switched on.
The water level is too low. Unplug your appliance and
rell it.
The steam pump has not
been primed.
Press the steam trigger
continuously for a few
seconds to begin steaming.
You are using the appliance
for the rst time.
Press the steam trigger
continuously for a few
seconds to begin steaming.
The water tank is not fully in
place.
Ensure that stopper is closed
and that the water tank snaps
when put into place.
The appliance
does not heat.
It is not plugged in, or not
switched on.
Plug in your appliance and
switch on.
The appliance is on auto o. Please refer to the ‘AUTO OFF’
section.
Water tank
leaks.
The water tank is not fully in
place or the stopper is not
closed properly.
Ensure that stopper is closed
and that the water tank snaps
when put into place.
Steam rate
decreases.
Calc Sealing. Refer to ‘ANTI CALC section in
instructions for use.
Horizontal usage It is normal for the steam
rate to decrease in horizontal
usage.
The steam
leaves stains on
the fabric or the
appliance spits.
You are using water with
additives.
Never add any additive in the
water tank.
The appliance has not been
rinsed enough after the
descaling operation.
Read carefully the ‘ANTI
CALC’ section in instructions
for use.
You are using other liquids
than white vinegar to descale
the product.
Use only white vinegar during
‘ANTI CALC’ procedure.
Appliance
steams
continuously.
Continuous steam has been
activated (USE paragraph).
Stop continuous mode by
pressing the trigger once.
IS THERE A PROBLEM ?
PROBLÈMES CAUSES
POSSIBLES
SOLUTIONS
La vapeur laisse des
taches sur le tissu ou
l’appareil émet des
projections.
Vous utilisez de l’eau
contenant des additifs.
N’ajoutez jamais d’additifs
dans le réservoir d’eau.
L’appareil n’a pas été
susamment rincé
après l’opération de
détartrage.
Lisez attentivement la
section «ENTRETIEN
ANTICALCAIRE» des
instructions d’utilisation.
Vous utilisez d’autres
liquides que du vinaigre
blanc pour détartrer le
produit.
Utilisez uniquement du
vinaigre blanc pendant la
procédure «ENTRETIEN
ANTICALCAIRE».
L’appareil émet de la
vapeur en continu.
La vapeur en continu a
été activée (paragraphe
UTILISATION).
Arrêtez le mode continu
en appuyant une fois sur la
gâchette.
Bekijk gratis de handleiding van Calor Pure Force DT8720C0, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Calor |
| Model | Pure Force DT8720C0 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7939 MB |
