Handleiding
Je bekijkt pagina 7 van 20
7
OPERATION
Before using the oven for first time, perform cleaning steps listed on page 17.
When the VariKwik™ oven is properly installed, here are very simple instructions on the operation:
STARTUP
Plug the oven into an appropriate outlet. Your oven is factory preset to STEP MODE (manual mode).
When the dark screen is touched (after plug-in or after a period of non-use (STANDBY MODE), the
following screens will appear:
*Your oven’s pre-heat temperature has been pre-set at the factory for 450°F for 120V units and 425°F for
220V units. You may modify this temperature in the SETTINGS> Adjust Temps> Modify> Adjust Preheat
screen.
See page 8 to continue in STEP MODE.
If you prefer operating in PROGRAM MODE, click on SETTINGS and turn to page 9 for directions on
switching to PROGRAM MODE.
Device will
automatically
move to next
screen after
3 seconds
PLEASE NOTE: The user may
always push the red power
button to toggle on or off, in
whichever screen it appears.
Pushing the power button
will bring up the following
screens:
WELCOME
CHOOSE*:
YES if proceeding
to STEP MODE
cooking,
NO if proceeding
to SETTINGS
PREHEAT? STEP MODE MENUPREHEATING
When the oven is
powering down, the oven
fan will continue blowing
for a while to cool down
the oven cavity, even after
the screen goes dark.
Oven will shut down
completely when cavity
temperature reaches 200F.
Bekijk gratis de handleiding van Cadco VKII-220, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cadco |
| Model | VKII-220 |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 3981 MB |
