Handleiding
Je bekijkt pagina 35 van 35
INACTIVITY
During periods of inactivity, take the following precautions:
- disconnect the appliance from the power and water supplies;
- rub a soft cloth lightly doused with mineral oil on all stainless steel surfaces;
- keep the appliance door slightly ajar. Before
reusing the appliance:
- clean the appliance and accessories thoroughly (see page 33);
- reconnect the appliance to the power and water supplies;
- inspect the appliance before using it again;
- switch on the appliance at minimum temperature for 50 minutes without any food inside it.
To ensure that the appliance is in perfect condition in terms of use and safety, maintenance and in- spections should be
performed at least yearly by an authorised support service centre.
DISPOSAL
Pursuant to Article 13 of Italian Legislative Decree no. 49 (2014) "Implementation of the WEEE Directive 2012/19/EU on electrical and
electronic equipment waste":
The crossed-out wheelie bins symbol indicates that the product was placed on the market after 13 August 2005 and
that, at the end of its useful life, it should not be disposed of with other waste, but must be collected separately.
All appliances are made with recyclable metal materials (stainless steel, iron, aluminium, galvanized steel, copper, etc.)
in percentages above 90% by weight.
Before disposal, make the appliance unusable by removing the power cable and all compartment or cavity closure devices (where
present).
At the end of its useful life, the product must be disposed of in such a way as to reduce any negative impact on the environment
and make efficient use of available resources. Prefer prevention, preparation for reuse, recycling and reclamation, and
remember “the polluter pays”. Please remember that illegal or incorrect dis- posal of the product incurs penalties, as provided
for by current legislation.
Information on disposal in Italy
In Italy, WEEE appliances must be delivered to:
- recycling centres (also known as waste disposal sites/facilities)
- the dealer from whom a new appliance is purchased, who is required to collect them free of charge (“one- for-one” exchange);
Information on disposal in European Union countries
The EU Directive on WEEE appliances has been implemented differently by each country. Therefore, if you want to dispose of this
appliance, we recommend you contact your local authorities or dealer for informa- tion on the correct disposal method.
CERTIFICATION
EU declaration of conformity for electrical appliances
Manufacturer: UNOX S.p.A.
Address: Via Majorana, 22 - 35010 Cadoneghe, Padua, Italy declares,
under its own responsibility, that the product BAKERLUX
SHOP.Pro™
complies with the Machinery Directive 2006/42/EC through the following standards: EN 60335-1: 2014
+ A11:2014
EN 60335-2-42: 2003 + A1: 2008 + A11:2012
EN62233: 2008
EN 60335-2-102:2006 + A1:2010
complies with the Electromagnetic Compatibility Directive 2014/30/EC through the following standards: EN 55014-1: 2006 +
A1: 2009 + A2: 2011
EN 55014-2: 1997 + A1: 2001 + A2: 2008
EN 61000-3-2: 2006 + A1: 2009 + A2: 2009
EN 61000-3-3: 2008
EN 61000-3-11: 2000
EN 61000-3-12: 2011
EN 61000-6-2: 2005
EN 61000-6-3: 2007
35
SETTINGS
Bekijk gratis de handleiding van Cadco Bakerluxaft-03HS-TD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cadco |
| Model | Bakerluxaft-03HS-TD |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 9859 MB |
