Handleiding
Je bekijkt pagina 11 van 35
INSERT TRA
Y
STEP
PROG PICTURE
CROISSANT
END OF COO KING PROGRA M
00:18’:30”
Cooking complete Current
cooking cycle
(less than 1 min. remaining)
Current cooking cycle
(more than 1 min. remaining)
OVEN TEMPERATURE
175°C
cooking by
time
cooking
continues
11
OVEN TEMPERATURE
175°C
END OF COOKING PROGRAM
NEVER
END OF COOKING PROGRAM
00:18’:30”
SET
PREHEATING
Set preheating temperature
PREHEATING
180°C
TEMPERATURE
120°C
Current oven cavity temperature
SET
SET
SET
PREHEATING
PREHEATING
EP
11//1
PREHEATING
180°C
PREHEATING
180°C
TEMPERA TURE
120°C
1
TEMPERA TURE
180°C
2
NSERT TRAY
END OF COOKING PROGRAM
1’:30”
CROISSANT
CROISSANT
PROG PICTURE
SAVE
6
SAVE
7
8
PROGRAMS
PAGE 1/25
CAKE
CROISSANT
CROISSANT
PROG 6/6
9
10
CROISSANT
CAKE
PROGRAMS
PAGE 1/25
OVEN TEMPERATUR E
175°C
CROISSANT
CROISSANT
OVENS
SET
3
6
Tap the “
PROG PICTURE
” icon
7
Choose the photo to go with the recipe.
8
Press the "
SAVE
" key to save the recipe.
9
The recently saved program is automat- ically
stored in the last position, after the other
programs already in the memory
.
The screen shows the "CROISSANT" rec- ipe has
been added and saved.
To use the saved cooking cycles, ac- cess the
"
PROGRAMS
" section section "Oven
Programs Menu" on page
13
You do not need to assign a name and photo
to the recipes that you want to
save. In this case, instead of the recipe name, the
word "PROG" and a number will appear. Again, the
program is automatically saved in the last position,
after the other programs already in the memory
.
10
Press the "
START/STOP
" icon: cooking will start
with the set parameters.
F
COOKING IN PROGRESS
1
If the cooking cycle requires preheating, the oven
starts to heat the cavity to bring it to the set
temperature (in the example: 180°C). DO NOT
place the dishes in the oven during this phase.
To skip preheating see section
"Skip a
preheating cycle in progress"
on page 17
2
At the end of preheating, the oven beeps and the
screen shown (INSERT TRAY) appears. You
should now put the food in the oven. When the
door is closed, step 1 automatically starts
according to the set parameters.
3
During the cooking cycle, the time re- maining
until the cycle is complete is shown on the
screen (in the example: 12 minutes and 6
seconds), as well as the temperature (in the
example: 180°C).
To view or change the parameters of a cooking
cycle in progress (e.g. lower the temperature or
extend the time), see
section View/modify
the parameters of a cooking cycle or
preheating in progress on
page 12
If you want to stop the cooking cycle in
progress, hold down the
"START/ STOP"
button
(approximately 4-5 sec- onds)
.
Bekijk gratis de handleiding van Cadco Bakerlux XAFT-04FS-TD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cadco |
| Model | Bakerlux XAFT-04FS-TD |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 9859 MB |
