Cabasse AMP 240 S handleiding
Handleiding
Je bekijkt pagina 31 van 42
31
ANALOG INPUT
This input can be connected to an audio
source (CD player, MP3 player, smartphone,
TV) equipped with an analog output RCA. Use
RCA / RCA cord / RCA cord (not included)
USB INPUT
This input is only useful for use in Wi-Fi / Ethernet mode
(paragraphs 4,5,6 below). Connect a USB stick or hard
drive containing audio les to this input to automatically
network them. All les in formats recognized by the
DLNA server are then listed in the Stream Audio Control
application and can be read by all Cabasse Stream players
connected to the same network. The USB socket has a 5V
- 1A DC power supply for use with a portable hard drive
without external power supply.
BLUETOOTH CONNECTION
1. Once the speaker is on, press the "Pairing" button on the back
2. The "Pairing" LED on the back should ash
3. Activate Bluetooth on your mobile
4. Select "Amplier" from the list of available devices
5. Once the connection is successful, the LED "Pairing" on the
back stops ashing
WIRE CONNECTION (LAN) TO
THE ETHERNET NETWORK
The wired Ethernet connection guarantees an optimum
and constant transfer rate in any environment. Use this
if Wi-Fi mode operation shows untimely cuts or stops of
music, signs of a saturated Wi-Fi network, or too much
router-to-stream distance.
Connect an RJ45 cable between the speaker and your
router (or Box Internet).
The connection is established when the STATUS diode
changes to solid blue. The WIFI connection is then
automatically disabled.
CAUTION: DHCP mode of the router must be enabled.
SPEAKER OUTPUT
Min 4 Ohms
ENGLISH
Bekijk gratis de handleiding van Cabasse AMP 240 S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cabasse |
| Model | AMP 240 S |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4143 MB |