C2G 29329 handleiding

Niet gecategoriseerd

C2G

16 pagina's

PDF beschikbaar

Handleiding

WIRELESS A/V FOR HDMI DEVICES USER MANUAL

(US)

PACKAGE CONTENTS

• Transmitter unit

• Receiver unit

• 2 x DC 5V/1A universal power adapters

• USB power cable

• 2 x HDMI cables

• Double sided tape

• User Manual

DEVICE INSTALLATION

Note:

• Prior to installation ensure that all devices are powered off.

• To ensure proper air circulation, do not cover the Transmitter or Receiver unit with any objects.

• The maximum range of 100ft can be obtained with direct line-of-sight from the Transmitter to the Receiver unit. Distance will be shortened by

obstacles or walls between the Transmitter and Receiver unit.

Step 1: From an HDMI source device, connect an HDMI cable to the HDMI IN port of the Transmitter unit.

Step 2: Connect HDMI cables to the HDMI OUT port of the Receiver unit, then connect the other end of the HDMI cable to display device.

Step 3: Connect the provided DC 5V/1A power adapter to the USB Micro-B port of the Transmitter unit. Then plug the DC 5V/1A power adapter into an

available power outlet.

Step 4: Connect the USB Micro-B end of the DC 5V/1A power adapter, that is provided, to the power port of the Receiver unit. Then plug the DC 5V/1A

power adapter into an available power outlet.

Step 5: Once all connections have been made and power has been established to all devices, the Transmitter and the Receiver unit will begin to

automatically pair. Allow up to 2 minutes for devices to pair. Do not touch or press “PAIRING” button during the pairing process, as this will cause the

device to not function properly.

DEVICE OPERATION

Note:

• Do not attempt to access the device’s IP address, as this will cause the device to not function properly.

• The Transmitter and Receiver units come paired together. Allow up to 2 minutes for devices to pair. However if re-paring becomes necessary

please follow the steps below.

Step 1: First Press “PAIRING” key on the receiver unit. You will see message “Connecting Please Wait” displayed on screen.

Step 2: And then Press “PAIRING” key on the transmitter unit for a second, and wait for auto connection.

Bekijk gratis de handleiding van C2G 29329, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.