BWT BC200 Plus handleiding
Handleiding
Je bekijkt pagina 7 van 72
IMPORTANT NOTE:
Detach the brush after use. Otherwise, it may deform due to constant compression, and could interrupt robot movement as a
result.
Adjustment of Trajectory
Locking Pin
The trajectory of the robot is dependent on the position of the pin that fixes the axle to a certain angle. There are two
pins: the one on the right is fixed and should remain untouched. Alter only the position of the pin on left.
Recommended settings:
NOTE: Wheel axle should be positioned above the locking pin
1
2
3
1
2
3
Pin location Pool size
For pools where the shortest
length is 3 meters or above.
If the robot does not cover the
entire pool with either pin
position 1 or 3, try below setting.
If the situation persists, deploy
the robot from a dierent location.
For pools where the shortest
length is 3 meters or below.
(Factory setting)
1
2
3
ENGLISH
6
2021/02 : A MAINTENANCE & CLEANING
bwt.com
Bekijk gratis de handleiding van BWT BC200 Plus, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BWT |
| Model | BC200 Plus |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 18073 MB |
