Buxton BBS 7700 handleiding
Handleiding
Je bekijkt pagina 5 van 44
EN 5
4. Putting into operation
Before fi rst use, be sure to read the safety instructions
contained in this user's manual carefully.
Before fi rst use, please charge the BT speaker to a maximum
level. Hold down the power On button to turn on the BT
speaker. Turning on/off is indicated by a sound signal. To turn
the BT speaker off , hold down the power On button.
Caution: After a longer period of inactivity, the appliance will
turns itself off .
5. Pairing devices via Bluetooth
Turn on the BT speaker and search for its Bluetooth name
"BBS 7700" in the device to which you wish to pair and start the
pairing process. If you are requested to enter a pairing code
while your device and the BT speaker are pairing, use the code:
“0000”. To disconnect a paired device, hold down the Bluetooth
button until LED starts blinking blue on the unit.
Note: To ensure a stable Bluetooth connection, make sure
that the distance between the BT speaker and your connected
device is kept within 10 meters.
Caution: Some connected devices support common volume
setting. If some of the connected devices do not support this
feature, the volume setting will operate separately on each
device.
6. TWS function
If you buy another Bluetooth speaker („BBS 7700“), you can
pair both speakers together for optimum stereo sound. First,
make sure your device is not connected to any BT speaker.
Turn both BT speakers on, press the TWS button briefl y and
wait until they are paired automatically. The orange LED
indicator will stop blinking and remain lit on both devices when
the BT speakers are paired.
Changing the volume level using the volume control buttons will
take eff ect automatically on both paired BT speakers. Pressing
and holding the Power On button on one of the speakers will
turn both paired speakers off .
Note: If the BT speakers fail to be paired successfully, hold
down the TWS button on both speakers until the speakers show
message „true wireles cleared“.
7. Audio AUX IN
The BT speaker is equipped with a 3.5mm jack. Your device
can be connected to the BT speaker via the supplied audio
cable. First connect the audio connector to your appliance and
then into the socket in the BT speaker.
Notice: before connecting your device and speaker, ensure
that the output signal from your device is at its minimum level
(minimum output volume). This will prevent the BT speaker from
damage. When the audio cable is connected, the BT speaker
does not meet the water ingression protection class.
Bekijk gratis de handleiding van Buxton BBS 7700, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Buxton |
| Model | BBS 7700 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3061 MB |
