Bushnell Trail Sentry 119302 handleiding
Handleiding
Je bekijkt pagina 12 van 30
12
ABOUT THE PIR SENSOR
The sensor that triggers the trail camera is Passive Infra Red, or PIR. Infrared energy is
essentially heat energy. The PIR detector operates by sensing a change in the infrared level
in its detection zone. This zone is a cone in the center 10 degrees of the camera’s eld of
view. The camera establishes an average long-term infrared level. When this level increased
suddenly the PIR detector signals the camera to record a picture and/or an event. Because of
this effect, the PIR detector will be more sensitive at night, when the average temperature is
lower.
You can use the red LED indicator on the front of the camera to conrm the detection zone.
When PIR is sensed, this “PIR detected” indicator will light. The camera’s eld of view is a
45 degree cone, centered on the PIR detection zone.
119302 Trail Sentry manual-Engli12 12 6/21/07 5:36:53 PM
Bekijk gratis de handleiding van Bushnell Trail Sentry 119302, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bushnell |
| Model | Trail Sentry 119302 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4128 MB |
