Bushnell First Strike 2.0 handleiding
Handleiding
Je bekijkt pagina 8 van 18
8
THE DROP ZONE-22 RIMFIRE BALLISTIC RETICLE
Scopes with the DROP ZONE-22 Rimfire Reticle are designed to be sighted-in at 50 yds, with aiming points every 25
yds, out to 125 yds. This reticle is calibrated for use with .22 Long Rifle high velocity ammunition. AR Optics scopes with
reticles in the second focal plane (refer to tech specs chart if not sure about your model) must also be turned to the highest
magnification setting to use the reticle’s drop point distance markings correctly for reference. For example, in the case of
the 2-7x 32mm model, the power change ring must be set at 7x for the ballistic function to work correctly.
How To Use the Reticle:
1. Sight in at 50 yds on any magnification setting.
2. Determine distance to target. For the best accuracy in determining distance, utilize a Bushnell Laser Rangefinder (Prime,
Nitro, Engage, etc.).
3. Set the scope’s magnification to 7x (7 power).
4. Place the appropriate aiming point on the desired target. If the target was determined to be at 115 yds, hold directly
between the 100 p8-yd aiming point and the 125 p8-yd aiming point.
75 YARDS
100 YARDS
125 YARDS
75 YARDS
100 YARDS
125 YARDS
2.30 MOA
5.30 MOA
8.70 MOA
15.40 MOA
Calibration Reference
Zero Distance: 50 Yards
Ammo Load: 40 gr .22 LR, Muzzle Velocity 1240 FPS
DROP ZONE-22 RIMFIRE BALLISTIC RETICLE
Bekijk gratis de handleiding van Bushnell First Strike 2.0, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bushnell |
| Model | First Strike 2.0 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3691 MB |
