Bushnell First Strike 2.0 handleiding
Handleiding
Je bekijkt pagina 10 van 18
10
THE DROP ZONE-308 BALLISTIC RETICLE
Scopes equipped with the DROP ZONE-308 ballistic reticle are designed to be sighted-in at 100 yds, and provide aiming
points in the shape of a dot every 100 yds, out to 500 yds. In addition, the top of the reticle’s bottom post (located below
the 4th dot) represents a holdover point for a shot at 600 yds.
The Drop Zone 308 reticle is calibrated for use with 308 Win/7.62 ammunition loaded with 168-175 grain bullets. AR
Optics scopes with reticles in the second focal plane (refer to tech specs chart if not sure about your model) must also be
turned to the highest magnification setting to use the reticle’s drop point distance markings correctly for reference. For
example, in the case of the 3-9x 40mm model, the power change ring must be set at 9 power. The 4.5-18x 40mm models
should be set at 18 power.
How To Use the Reticle:
1. Sight in at 100 yds on any magnification setting.
2. Determine distance to target. For the best accuracy in determining distance, utilize a Bushnell Laser Rangefinder (Prime,
Nitro, Engage, etc.).
3. Set the scope’s magnification to its highest power.
4. Place the appropriate aiming point on the desired target. If the target was determined to be at 350 yds, hold directly
between the 300 p10-yd aiming point and the 400 p10-yd aiming point.
16.14 MOA
11.89 MOA
4.85 MOA
2.04 MOA
8.14 MOA
Calibration Reference
Zero Distance: 100 Yards
Ammo Load: 168-175 gr .308, Muzzle Velocity 2600
DROP ZONE-308 BALLISTIC
RETICLE
200 YARDS
300 YARDS
400 YARDS
500 YARDS
600 YARDS
Bekijk gratis de handleiding van Bushnell First Strike 2.0, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bushnell |
| Model | First Strike 2.0 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3691 MB |
