Burris FastFire C handleiding
Handleiding
Je bekijkt pagina 9 van 12
FASTFIRE C USER MANUAL | 9
ELEVATION AND WINDAGE ADJUSTMENT
Adjusting Windage/Elevation can be made with the included tool or with a
small flathead screwdriver. Each tick-mark on the sight body represents
4 MOA of travel. There is 80 MOA of Windage and Elevation adjustment.
ZEROING THE POINT-OF-IMPACT
Adjust the point-of-impact by using a small slot screwdriver. The direction
of the shift of the point-of-impact is indicated on the elevation and
windage adjustment screws. One tick mark on either adjustment screw
corresponds to 4 minutes of angle (MOA), or approximately 4 inches at
100 yards or 1 inch at 25 yards.
• Turning right moves point of impact Up
• Turning left moves point of impact Down
• Turning right moves point of impact Right
• Turning left moves point of impact Left
*Note: Point of Impact (POI) is where bullet hits target, not Red Aiming Dot
P
O
I
U
P
P
O
I
D
O
W
N
P
O
I
R
I
G
H
T
P
O
I
L
E
F
T
Bekijk gratis de handleiding van Burris FastFire C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Burris |
| Model | FastFire C |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1168 MB |
