Burris FastFire C handleiding
Handleiding
Je bekijkt pagina 5 van 12
FASTFIRE C USER MANUAL | 5
BATTERY INSTALLATION
The FastFire C operates with one Lithium
CR2032 battery.
The battery is installed on the bottom of
the optic with the positive (+) side facing
down and must be installed with the
optic removed from firearm. The battery
is secured into place when the optic is
mounted. Screws should be torqued to
9in-lbs.
OPERATING INSTRUCTIONS
For optimum performance and to prevent damage to this precision instru-
ment, carefully follow all instructions.
CAUTIONS AND WARNINGS
Use proper firearms safety. Make sure the firearm is unloaded before
mounting the optic.
KEY FEATURE:
BURRIS INTELLIGENT AUTO BRIGHT
The integrated control circuit adjusts the brightness of the aiming dot
according to surrounding light levels. The brightness sensor dectects the
light level in the direction of the target and modifies the intensity of the
dot accordingly so that it is not overpowering in low light while remaining
highly visible in bright daylight. When holstered, or stored, the optic goes
into an ultra-low brightness setting, saving the battery for when you need
it! Bringing your firearm up to ready, instantly brings the dot back to the
optimal level! Be careful not to obstruct the sensor. Clean if necessary. If
you wish to check its function, cover the sensor.
FIGURE 1
Bekijk gratis de handleiding van Burris FastFire C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Burris |
| Model | FastFire C |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1168 MB |
