Burg Wächter secuENTRY pro 7116 Duo handleiding

Niet gecategoriseerd

Burg Wächter

58 pagina's

PDF beschikbaar

Handleiding

8 Insert the CR123A lithium battery with the correct polarity (positive

pole forward)

9 Slide the sleeve onto the inner knob and snap in place.

C. Programming / Function / Operation

The keyboard can be registered to a cylinder either via the keyboard

itself or via the secuENTRY software. To operate a cylinder via a

keyboard, both units must be matched. Proceed as follows:

Registration using the keyboard

• Activate the keypad using the key

• Then press FUNC, the “Code Change” menu is displayed

• Scroll using the 1 or 2 keys until reaching the Administrator menu

• Conrm with

• Scroll using the 1 or 2 keys until reaching the Administrator menu

setup options "Setup"

• Conrm with

• Enter the Admin. Code of the unit to be read

• “Data has been saved” is displayed after a successful registration

Attention! Please make sure that no other powered secuENTRY

unit is placed within direct reach of the device during installation

a new keypad or cylinder, as by mistake such unit could be

addressed instead of the intended one. When in doubt, disconnect

these units from power.

Registration via the secuENTRY software

Please refer to the operating instructions of the respective software.

Attention! For the registration of the secuENTRY pro 7116 Duo

prole cylinder, please use only the QR code of the internal knob

in the PC software. This is provided with the administrator code.

It is not necessary to register the external connector in the PC

software.

22 | English secuENTRY pro 7116 Duo

Bekijk gratis de handleiding van Burg Wächter secuENTRY pro 7116 Duo, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.