BSS Audio MSR-602/604 II handleiding
Handleiding
Je bekijkt pagina 23 van 38
21
The permissible settings are shown in Figure 11, and the effects of
each on system gain and headroom is described in Table 2. Note that
combinations of header settings other than those shown should not be
used as they do not give a proper balanced drive.
TABLE 2 OUTPUT LEVEL SELECT HEADROOM AND GAIN
STRUCTURE
Setting Output clip System gain Description
Level /dB (Note 1)
3dBm +3dBm 0 Mic level output. Factory default
13dBm +13dBm +10 MSR-604 pre Mk II compatibility
23dBu +23dBu +20 Line level output
(Note 1. Gain between input XLR and output XLR with channel Gain switch set to 0dB
and input pad set to MIC).
NOTE: The output levels are referred to using both dBm and dBu for
different settings. This is because the unit is capable of driving 3dBm or
13dBm into a 600Ω load but the 23dBu output, although capable of
driving 600Ω will, drop slightly in level for loads below 2kΩ.
Fig. 11 Output Level
Select Jumpers
Bekijk gratis de handleiding van BSS Audio MSR-602/604 II, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BSS Audio |
| Model | MSR-602/604 II |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6676 MB |
