Bryton Rider 650 handleiding
Handleiding
Je bekijkt pagina 33 van 52
33
Pair Sensors
1. Select in the home page.
2. Find Sensors.
Add New Sensors
1. Select + to add new sensors.
2. Choose any type of sensor that you would like to pair with.
3. To pair sensors with your device, please have Bryton
Smart Sensors installed rst, then wear a heart rate
monitor or rotate the crank and wheel a few times to wake
Bryton Smart Sensors up.
4. For Bike Radars, E-bikes, and Ess/Di2, please turn the
power on before starting pairing.
5. Let the device detect sensors automatically or select
to enter a sensor ID manually.
6. Pick a detected sensor you would like to pair with then
select to save.
Disconnect sensors
1. Select the sensor you would like to deactivate.
2. Turn off the status to disband the sensor.
Activate Paired Sensors
1. Select the sensor you would like to activate.
2. Turn on sensor status then sensors will be connected
automatically.
3. If the sensor failed to be connected or you want to switch
to this sensor, select to reconnect it with your device.
Remove sensors
1. Choose the sensor you would like to remove.
2. Tap Remove and click to conrm.
Switch Sensors
1. If another paired sensor is detected, the device will ask
you if you want to switch to another sensor.
2. Tap to switch the sensor.
We suggest that you pair all your sensors with the device beforehand, Rider 650 will scan
for nearby active sensors from the sensor pool, making switching between bikes and sensors
easier and more convenient than ever.
NOTE:
• If you select X in the sensor found notication, the detected sensor would be deactivated. You
will need to turn on its Status to activate it again.
• Sensors only need to be switched if they are in the same type and both are already added in
the list.
Bekijk gratis de handleiding van Bryton Rider 650, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bryton |
| Model | Rider 650 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9113 MB |
