Brother HL-L2442DW handleiding

259 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 73 van 259
Home > Network > Wireless Network Settings > Use the Wireless Network > Configure Your Machine for a
Wireless Network Using the One Push Method of Wi-Fi Protected Setup
(WPS)
Configure Your Machine for a Wireless Network Using the One Push
Method of Wi-Fi Protected Setup
(WPS)
Related Models: HL-L2400DW/HL-L2400DWE/HL-L2442DW/HL-L2445DW/HL-L2447DW/HL-L2865DW
If your wireless access point/router supports WPS (PBC: Push Button Configuration), you can use WPS from
your machine's control panel menu to configure your wireless network settings.
1. Press a or b to select the [Network] option, and then press OK.
2. Press a or b to select the [WLAN(Wi-Fi)] option, and then press OK.
3. Press a or b to select the [WPS/Push Button] option, and then press OK.
4. When [WLAN Enable?] appears, select On.
This will start the wireless setup wizard.
5. When the LCD displays [Press Key on rtr], press the WPS button on your wireless access point/router.
Then follow the LCD instructions on your machine. Your machine will automatically detect your wireless
access point/router and try to connect to your wireless network.
If your wireless device is connected successfully, the machine's LCD displays [Connected].
You have completed the wireless network setup. To install the drivers and software necessary to use your
machine, go to your model's Downloads page at
support.brother.com/downloads.
Related Information
Use the Wireless Network
Related Topics:
Wireless LAN Report Error Codes
68

Bekijk gratis de handleiding van Brother HL-L2442DW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkBrother
ModelHL-L2442DW
CategoriePrinter
TaalNederlands
Grootte20718 MB

Caratteristiche Prodotto

Kleur van het productGrijs
Ingebouwd displayJa
Gewicht6000 g
Breedte356 mm
Diepte360 mm