Handleiding
Je bekijkt pagina 233 van 259
Level 3 Level 4 Level 5 Level 6 Descriptions
Network Reset
- - - Restore the machine's network settings back to
the factory settings, except the administrator
password.
1
On connection to the network, if the machine's ‘Boot Method’ is ‘Auto’ the machine will attempt to set the IP address and Subnet Mask
from a boot server such as DHCP. If a boot server cannot be found, an APIPA IP address will be allocated, such as 169. 254. (001-254).
(000-255). If the ‘Boot Method’ of the machine is set to ‘Static’ you must manually enter an IP address from the machine's control panel.
[Network] (HL-L2460DN)
Level 3 Level 4 Level 5 Level 6 Descriptions
Wired LAN TCP/IP Boot Method
- Choose the IP method that best suits your
needs.
IP Address
- Enter the IP address.
Subnet Mask
- Enter the Subnet mask.
Gateway
- Enter the Gateway address.
Node Name
- Enter the Node name.
WINS Config
- Select the WINS configuration mode.
WINS Server Primary
Specify the IP address of the primary WINS
server.
Secondary
Specify the IP address of the secondary WINS
server.
DNS Server Primary
Specify the IP address of the primary DNS
server.
Secondary
Specify the IP address of the secondary DNS
server.
APIPA
- Allocate the IP address from the link-local
address range automatically.
1
IPv6
- Enable or disable the IPv6 protocol.
Ethernet
- - Choose the Ethernet link mode.
Wired Status
- - Display the wired network connection status.
MAC Address
- - Display your machine's MAC address.
Wired Enable
- - Turn the wired interface on or off.
Web Based
Mgmt
- - - Enable or disable Web Based Management.
If you enable this function, make sure you
specify the connection method to use Web
Based Management.
Global Detect Allow Detect
- - Enable or disable Global Detect, a function that
detects and notifies the user when the user
unintentionally connects to a global network.
Reject Access
- - Disable connections to the global network.
Network Reset
- - - Restore the machine's network settings back to
the factory settings, except the administrator
password.
1
On connection to the network, if the machine's ‘Boot Method’ is ‘Auto’ the machine will attempt to set the IP address and Subnet Mask
from a boot server such as DHCP. If a boot server cannot be found, an APIPA IP address will be allocated, such as 169. 254. (001-254).
(000-255). If the ‘Boot Method’ of the machine is set to ‘Static’ you must manually enter an IP address from the machine's control panel.
228
Bekijk gratis de handleiding van Brother HL-L2442DW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Brother |
| Model | HL-L2442DW |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 20718 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Ingebouwd display | Ja |
| Gewicht | 6000 g |
| Breedte | 356 mm |
| Diepte | 360 mm |
