Handleiding
Je bekijkt pagina 155 van 259
LED Indication Status Monitor Cause Action
Replace Drum It is time to replace the drum
unit.
Replace the drum unit with a new
one.
See Related Information:
Replace the Drum Unit.
If this message appears after
replacing the drum unit, the
drum unit counter has not
been reset.
Reset the drum unit counter.
See Related Information: Reset
the Drum Counter.
Cover is Open The front cover is not
completely closed.
Open and then firmly close the
front cover of the machine.
The fuser cover is not
completely closed or paper
was jammed in the back of
the machine when you turned
the power on.
• Close the fuser cover located
inside the back cover of the
machine.
• Make sure paper is not
jammed inside the back cover
of the machine, and then
close the fuser cover.
2-sided Disabled
The back cover of the
machine is not closed
completely.
Close the back cover of the
machine until it locks in the
closed position.
The 2-sided tray is not
installed completely.
Install the 2-sided tray firmly in
the machine.
Jam 2-sided The paper is jammed
underneath the 2-sided tray
or the fuser unit.
Clear the Jam in the 2-sided tray
or the fuser unit.
Jam Inside The paper is jammed inside
the machine.
Open the front cover, remove the
drum and toner, and clear the
paper jam.
Jam Rear The paper is jammed in the
back of the machine.
Open the fuser cover and remove
all jammed paper. Close the fuser
cover.
Jam Tray 1 The paper is jammed in the
paper tray.
Pull the paper tray out completely
and remove all jammed paper.
Out of Memory The machine's memory is
full.
Reduce the print resolution.
Size Error DX The paper size specified in
the printer driver is not
suitable for automatic 2-sided
printing.
Load the correct size of paper in
the tray and set the tray for that
paper size.
The paper size suitable for
automatic 2-sided printing is A4.
The paper in the tray is not
the correct size and is not
suitable for automatic 2-sided
printing.
Size Mismatch The paper in the tray is not
the correct size.
Load the correct size of paper in
the tray and set the size of paper
to the tray.
Press Go.
The paper tray you selected
does not support the paper
size specified in the printer
driver.
Change the printer driver setting
or the machine's tray setting so
that the paper size selected in the
printer driver matches the paper
size loaded in the tray you
selected.
150
Bekijk gratis de handleiding van Brother HL-L2442DW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Brother |
| Model | HL-L2442DW |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 20718 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Ingebouwd display | Ja |
| Gewicht | 6000 g |
| Breedte | 356 mm |
| Diepte | 360 mm |
