Brother CS-6000i handleiding
Handleiding
Je bekijkt pagina 9 van 60
7
1
Be sure to observe the following precautions
concerning the power supply.
a
Insert the plug into a wall outlet.
a Main power switch
b Jack/socket connector
b
Set the main power switch to “I”.
The sewing lamp comes on when the machine
is turned on.
c
To turn off the machine, set the main power
switch to “
”.
The sewing lamp goes off when the machine
is turned off.
Note
● If a power outage occurs while the sewing
machine is being operated, turn off the sewing
machine and unplug the power supply cord.
When restarting the sewing machine, follow the
necessary procedure to correctly operate the
machine.
(For U.S.A. only)
● This appliance has a polarized plug (one blade
wider than the other). To reduce the risk of electric
shock, this plug is intended to fit in a polarized
outlet only one way. If the plug does not fit fully in
the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician
to install the proper outlet. Do not modify the plug
in any way.
Insert the foot controller plug into its jack/socket.
a Foot controller jack/socket
USING YOUR SEWING
MACHINE
Power supply precautions
WARNING
● Use only regular household electricity for the
power source. Using other power sources may
result in fire, electric shock, or damage to the
machine.
● Make sure that the plugs on the power cord are
firmly inserted into the electrical outlet and the
power supply jack on the machine.
Otherwise, a fire or electric shock may result.
● Do not insert the plug on the power cord into an
electrical outlet that is in poor condition.
● Turn off the main power and remove the plug in
the following circumstances:
• When you are away from the machine
• After using the machine
• When the power fails during use
• When the machine does not operate
correctly due to a bad connection or a
disconnection
• During electrical storms
CAUTION
● Use only the power cord included with this
machine.
● Do not use extension cords or multi-plug
adapters with many other appliances plugged in
to them. Fire or electric shock may result.
● Do not touch the plug with wet hands. Electric
shock may result.
●
When unplugging the machine, always turn off the
main power first. Always grasp the plug to remove
it from the outlet. Pulling on the cord may damage
the cord, or lead to fire or electric shock.
● Do not allow the power cord to be cut,
damaged, modified, forcefully bent, pulled,
twisted, or bundled. Do not place heavy objects
on the cord. Do not subject the cord to heat.
These things may damage the cord and cause
fire or electric shock. If the cord or plug is
damaged, take the machine to your authorized
dealer for repairs before continuing use.
●
Unplug the power cord if the machine is not to be
used for a long period of time. Otherwise a fire
may result.
Power supply
Foot controller
Bekijk gratis de handleiding van Brother CS-6000i, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Brother |
| Model | CS-6000i |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 8648 MB |
Caratteristiche Prodotto
| Soort bediening | Knoppen |
| Kleur van het product | Wit |
| Gewicht | 5896 g |
| Breedte | 170 mm |
| Diepte | 408.9 mm |
