Brother BM-2800 Handleiding (108 Pagina's)

Handleiding

SEWING BUTTONHOLES AND BUTTONS ————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————

—

———————————————————————————————————————

—————

39

1 Buttonhole fine-adjustment screw

2 Left side

3 Buttonhole appearance

If the left side is too open, turn the buttonhole

fine-adjustment screw with a large

screwdriver in the

“–” direction.

If the left side is too tight, turn the buttonhole

fine-adjustment screw with a large

screwdriver in the

“+” direction.

• This adjustment ensures both sides of the

buttonhole are the same.

Sewing buttons

1

Measure the distance between the

buttonholes and mark the fabric. Then

adjust the stitch width so that it is the

same as the distance between the holes in

the button.

2

Turn off the machine.

3

Change the foot to the button sewing foot

“M”.

4

Place the darning plate on the needle plate.

5

Turn on the machine.

CAUTION

6

Put a button between the foot and the

fabric and make sure that the needle enters

the holes without hitting the button. If it

hits, see step

1

.

7

At a slow speed, sew about 10 stitches.

CAUTION

8

Pull the upper thread at the end of the

stitching to the wrong side of the fabric,

and then tie it with the bobbin thread.

X Use scissors to cut the upper thread and

the bobbin thread at the beginning of the

stitching.

Stitch

Name

Pattern

Stitch

Length

[mm

(inch)]

Stitch

Width

[mm

(inch)]

Foot Other

Zigzag

Stitch

F

(1/64)

Any

Button

Sewing

Foot

“M”

Darning

Plate

2

3

1

3

● Do not turn on the machine while

pressing down the foot controller.

● Make sure the needle does not hit the

button during sewing. The needle may

break and you may be injured.

Bekijk gratis de handleiding van Brother BM-2800, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.