Brother BM-2800 Handleiding (108 Pagina's)

Handleiding

SEWING BUTTONHOLES AND BUTTONS ————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————

—

———————————————————————————————————————

—————

37

■ If the button does not fit in the button guide

plate

Add together the diameter and thickness of the

button, and then set the button guide plate to the

calculated length. (The distance between the

markings on the presser foot scale is 5 mm (3/16

inch).)

1 Presser foot scale

2 Length of buttonhole

(Diameter + thickness of button)

3 5 mm (3/16 inch)

Example: For a button with a diameter of 15 mm (9/16

inch) and a thickness of 10 mm (3/8 inch), the button

guide plate should be set to 25 mm (1 inch) on the

scale.

1 10 mm (3/8 inch)

2 15 mm (9/16 inch)

4

Pass the upper thread down through the

hole in the presser foot.

5

You need to sew the front bar tack first.

Lower the presser foot to align the marks

on the foot with the mark on the fabric.

1 Starting mark on the fabric

2 Marks on the foot

6

Lower the buttonhole lever and push it

back slightly.

1 Buttonhole lever

7

While gently holding the upper thread,

start the machine.

8

The bar tacks of the buttonhole are sewn

in the order shown.

9

Stop the machine when buttonhole

stitching is finished.

Note

● If buttonhole sewing was interrupted, sew

trial stitching one or two times on a scrap

piece of fabric before continuing to sew the

project. Stitching that is continued after

being interrupted may be sewn incorrectly.

● If thick seams are being sewn and the fabric

does not feed, sew with the coarser (longer)

stitch.

0

Raise the needle and the presser foot

lever, remove the fabric, and cut the

thread.

a

Raise the buttonhole lever to its original

position.

1

2

3

1

2

1

2

1

3

24

Bekijk gratis de handleiding van Brother BM-2800, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.