Brother BM-2800 Handleiding (108 Pagina's)

Handleiding

20

—————

——————————————————————————————————————————————————————————————————————————

—

————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————

1

5

While holding the thread from the spool

with your right hand, pass the thread

toward you, in the groove on the thread

guide.

• Make sure that the spring in the groove

catches the thread.

1 Spring

6

Feed the upper thread as shown in the

following illustration.

7

Make sure you guide the thread through

the thread take-up lever from right to left

as shown in the following illustration.

1 Thread take-up lever

Memo

● If the thread take-up lever is lowered, the

upper thread can not be wrapped around

the thread take-up lever. Make sure you

raise the needle by turning the handwheel

toward you (counterclockwise) so that the

mark on the wheel points up.

8

Put the thread behind the guide above the

needle.

• The thread can easily be passed behind the

needle bar thread guide by holding the

thread in your left hand, then feeding the

thread with your right hand.

1 Needle bar thread guide

9

Thread the needle from front to back

leaving a thread tail of about 5 cm

(2 inches).

• If your sewing machine is equipped with a

needle threader, use the needle threader to

thread the needle (see next section).

1 5 cm (2 inches)

Note

● Make sure you raise the presser foot lever

and the thread take-up lever before you feed

the upper thread.

● If you incorrectly feed the thread you may

cause sewing problems.

1

Bekijk gratis de handleiding van Brother BM-2800, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.