Handleiding
Je bekijkt pagina 9 van 37
P a g e | 8
web:brohn.com.au
If the power supply cable is damaged, it must be replaced by its manufacturer or
authorized technical service or any other personnel qualified at the same level.
Appliance is equipped with a type ‘’Y’’ cord cable.
Make sure the plug is inserted firmly into wall socket to avoid sparks.
Do not use steam cleaners for cleaning the appliance, otherwise electric shock
may occur.
An omnipolar switch capable to disconnect power supply to the appliance is
required for installation. Disconnection from power supply shall be provided with a
switch or an integrated fuse, circuit breaker installed on fixed power supply
according to wiring regulations and building code.
Useful Tips:
Safety Switches and RCD’s
An electric oven is required to have a safety switch or an RCD installed along with it. They are
located on a final sub-circuit in domestic and residential buildings and connected when new
ovens are installed. If a new switchboard is installed or if any rewiring occurs in the kitchen
then a new circuit will need to be connected to the cooker control unit.
Arc Fault Protection Devices
These are installed to help prevent an electrical fire from starting due to an arc fault. This type
of fault occurs between two conductors and will often create a large amount of heat leading
to fires. These arc fault protection devices will be connected to the electric oven through the
electrical switchboard.
Isolation Switches
Isolation switches are mandatory to be installed with electric cookers to help with future tasks.
An isolation switch allows an electrician to disconnect the power to a specific system. This is to
help an electrician work to repair or perform maintenance work on the oven and still have
power to other electrical systems. They are installed and mounted next to the oven and for
the electrician to easily access it.
Hardwired Electric Ovens
Ovens which run on electricity are hardwired if they have a rating of over 3kw. If the oven has
less than 3kw then it can be plugged into a dedicated circuit. Hardwired ovens are always
recommended as they are safer and more reliable.
An oven which is hardwired means the cables are furnished with the product with no plug in.
The oven is directly installed in the building connecting to its own dedicated circuit.
Plug in an Electric Oven
If the oven is safe to be plugged into an electrical outlet then it can be installed this way. An
electric oven will often have higher power requirements which means it cannot be installed
into regular power-points. A 220-240 volt outlet is needed for electric powered ovens for it to
run safely.
It is strongly recommended that an electrician still performs the installation to ensure the oven
is properly installed. The system might be incorrectly installed and there are more steps to
perform than simply plugging in the appliance. Mostly due to the amount of electrical wiring
involved.
Bekijk gratis de handleiding van Bröhn BRO6010FP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bröhn |
| Model | BRO6010FP |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 4837 MB |