Handleiding
Je bekijkt pagina 14 van 31
web:brohn.com.au
P a g e | 14
4.3
AUTOMATIC IGNITION WITH FLAME FAILURE SAFETY DEVICE
The appliance is fitted with a flame failure safety device on each burner,
which is designed to stop the flow of gas to the burner head in the event of
the flame going out.
To ignite a burner:
Press in the control knob of the burner that you wish to light and turn it anti-
clockwise to the maximum position.
If you keep the control knob depressed, the automatic ignition for the burner
will operate.
You should hold down the control knob for 20 seconds after the flame
on the burner has lit.
After this 20 second interval, turn the control knob to your required setting
between the maximum and minimum setting symbols.
To switch the burner off, turn the control knob fully clockwise to the
“gas off” position.
In case of power failure, the burners can be lit by carefully using a match.
4.4
ENERGY SAVING TIPS
Minimum diameter
PANS
Maximum diameter
The diameter of the bottom of the pan should be compatible with the
burner.
Use flat bottomed pans only.
The burner flame must never extend beyond the diameter of the pan.
BURNERS
Wok
220 mm
260 mm
Rapid
180 mm
220 mm
Semi-rapid
120 mm
200 mm
Auxiliary
80 mm
160 mm
Bekijk gratis de handleiding van Bröhn BRGC-AGCP9053-D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bröhn |
| Model | BRGC-AGCP9053-D |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 3873 MB |