Broan HRV200TE handleiding

56 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 23 van 56
23
7. BALANCING THE UNIT (Contd)
7.5 BAlAnCing PROCEduRE (COnTd)
J Adjust fresh air TURBO speed (or press % HUM key to keep it as is).
TURBO
VQ0146
TURBO
VQ0151
TURBO
VQ0147
Press on MODE key to raise
the value.
Press on TURBO key to lower
the value.
Ajust the airflow until the
reading on magnehelic gauge
reaches the stale airflow value.
MODE
VQ0128A
TURBO
OR
Install tubing on fresh
airflow pressure taps
and take the reading.
Check the magnehelic
gauge along with the unit
balancing chart until the
desired airflow is reached.
If you have selected the preset speed balancing at H, the balancing procedure is completed.
If you have selected the custom speed balancing, continue with the following:
K Set CONT speed.
CONT
VQ0154
CONT
VQ0153
CONT
VQ0152
Press on MODE key to raise
the value.
Press on TURBO key to lower
the value.
Ajust the airflow until the
reading on magnehelic gauge
reaches the desired CFM value.
MODE
VQ0128A
TURBO
OR
Check the magnehelic
gauge along with the unit
balancing chart until the
desired airflow is reached.
Press % HUM key
to accept chosen
percentage.
VQ0121
% HUM
Write selected
airflow percentage
on label affixed on
the unit for future
reference.
Press % HUM key
to accept chosen
percentage.
VQ0121
% HUM
Write selected
airflow percentage
on label affixed on
the unit for future
reference.

Bekijk gratis de handleiding van Broan HRV200TE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkBroan
ModelHRV200TE
CategorieAirco
TaalNederlands
Grootte8275 MB