Broan HRV200TE handleiding

56 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 21 van 56
21
7. BALANCING THE UNIT (Contd)
7.5 BAlAnCing PROCEduRE
B Connect an VT9W main wall control nearby the unit.
gEnEral inForMation aboUt vt9w wall Control UsagE in Unit balanCing proCEdUrE
% HUM
TURBO
MODE
VQ0161
Press on MODE
key to raise the value.
Press on % HUM
key to accept.
Press on TURBO
key to lower the value.
TURBO
VQ0144
This label section shows which speed is
being set (e.g.: TURBO).
Arrow shows where to install the
magnehelic gauge tubing
(e.g.: EXHAUST).
Motor speed indicator.
PROG flashes on screen as long as you
are in Program Mode Setting menus (preset
speeds or custom speeds). It disappears
from screen when all settings are done or
when there is no change after 60 seconds.
Press and hold both
% HUM and TURBO
keys for 10 seconds.
% HUM
VQ0141A
TURBO
AND
10 sec.
VQ0142
PROG start flashing.
A 10-second
countdown appears.
OR
VQ0136A
% HUM
MODE
TURBO
OR
Press any key to enter
program mode. If there
is no key pressed before
the end of the countdown,
the unit will go back to its
previous mode.
C Enter Program Mode.
Choose between two options: 01, 02, etc.: Preset speeds (balance the unit only, faster option)
_ _: Custom speeds (adjust TURBO speed and balance the unit, then set CONT,
VBATHW control and RECIRC speeds).
D Select the Preset speeds or Custom speeds.
VQ0149
Press on MODE key to
raise the value.
Press on TURBO key to
lower the value.
VQ0148
VQ0121
% HUM
Press % HUM key
to accept chosen
preset speed.
MODE
VQ0128A
TURBO
OR
NOTE: From 01 value, pressing on TURBO key will access to custom speed settings (see page 23).
VQ0143
01 speed value
(preset value) will
appear on screen.
Write selected
preset speed
on label affixed
on the unit for
future reference.
E Connect the magnehelic tubings to the unit (see 7.3).

Bekijk gratis de handleiding van Broan HRV200TE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkBroan
ModelHRV200TE
CategorieAirco
TaalNederlands
Grootte8275 MB