Broan BUF403WW handleiding

Afzuigkap

Broan

6 pagina's

PDF beschikbaar

Handleiding

For ADA compliance installation guidelines, please type the model number into our website.

INSTALL OPTIONAL EZ1 TEMPORARY SUPPORT BRACKETS (SUPPLIED WITH BUEZ MODELS)

The EZ1 installation system consists of 2 brackets (included in parts bag). Use these brackets to TEMPORARILY hang the hood to the cabinet during its installation. If not used, go to step 5.

A = 7" (± 1/16")

7" (± 1/16")

Back of hood/Wall

Arrière de la hotte/Mur

Outer side of the bracket flush with hood side.



F INSTALL THE HOOD

Run house power cable between service panel and hood location. Run the house power cable into the hood through the strain relief previously installed in step 3.

WITH EZ1 BRACKETS

Hang the hood on the brackets using the 2 recessed FRONT HOLES. Slide hood back towards wall until

hood is fully engaged.

Use slots oR

keyholes

WHILE HOLDING THE HOOD,

secure the hood to the cabinet

using 4 round head wood

screws (included in parts bag).

Use 2 screws per side.

WITHOUT EZ1 BRACKETS

Two installers are recommended because of the weight of the hood.

BLACK/NOIR

WHITE/BLANC

HE0503AF

GREEN GROUND

SCREW/VIS VERTE

MISE À LA TERRE

GREEN OR BARE/

VERT OU DÉNUDÉ

G PLUG THE HOOD

Connect House Power Cable to

the range hood wiring: BLACK

to BLACK, WHITE to WHITE

and GREEN or bare wire under

GREEN ground screw.

Reinstall the wiring cover.

H INSTALL LIGHT BULB

Install a LED light bulb (not included). It

should be A19 type, E26 base,75watts

maximum. If an incandescent light bulb

is used (75 watts maximum), the light

lens (part no. S99110437) must be

used.

OPTIONAL LIGHT LENS /

DIFFUSEUR

OPTIONNEL

SOCKET/

DOUILLE

HD1095AF

Hoods with rocker switch controls:

The fan and light are each controlled by a rocker switch. The light switch

has two positions, “ON” and “OFF”. The fan switch has three positions -

“HIGH”, “LOW” and “OFF”. ( “OFF” is the middle position.)

Hoods with knob control:

Right knob controls light and left knob controls blower. Rotate light knob

CLOCKWISE to turn light on HIGH intensity. Further CLOCKWISE

rotation turns light to LOW intensity. Rotate knob fully COUNTER-

CLOCKWISE to turn light OFF. Rotate blower knob CLOCKWISE

to turn blower ON to HIGH speed. Further CLOCKWISE rotation

decreases blower speed. Rotate knob fully COUNTER-CLOCKWISE

(past HIGH speed) to turn fan OFF.

I OPERATION

J CLEANING AND MAINTENANCE

• The grease filter should be cleaned frequently. Use a warm dishwashing detergent solution.

Dishwasher safe.

• Filter removal: Remove aluminum filter by turning filter retaining clip to one side. When installing filter,

make sure that filter slides under retaining tabs on back of fan housing. Turn filter retaining clip so that

arrows on clip points toward front and back of hood.

• The fan blade should be cleaned frequently. Use a clean cloth soaked with warm detergent solution.

DUCTFREE FILTER (some models only)

• Remove filter by turning filter retainer to one side. The ductfree filter is not washable, and will last up to 6 months with normal use. Replace the filter when colored side

becomes noticeably dirty or discolored. When installing filter, make sure that filter slides under retaining tabs on back of fan housing. MAKE SURE THAT COLORED SIDE

OF FILTER IS NEXT TO FAN WHEN FILTER IS INSTALLED. Turn filter retainer so that arrows on retainer point toward front and back of hood.

filteR Retaining clip

filteR

tabs

HD1571

Bekijk gratis de handleiding van Broan BUF403WW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.