Brighter Pixel Strobe IP handleiding
Handleiding
Je bekijkt pagina 3 van 17
B r i g h t e r P i x e l S t r o b e I P
3 |
SAFETY PRECAUTIONS
• DO NOT TOUCH the fixture housing during operation. Turn OFF the
power and allow approximately 15 minutes for the fixture to cool down
before servicing.
• DO NOT shake fixture, and avoid brute force when installing and/or
operating fixture.
• DO NOT operate fixture if the power cord is frayed, crimped,
damaged and/or if any of the power cord connectors are damaged and
do not insert into the fixture securely with ease.
• NEVER force a power cord connector into the fixture. If the power
cord or any of its connectors are damaged, replace it immediately with a
new one of the same power rating.
• DO NOT block any air ventilation slots.
• All fan and air inlets must remain clean and never blocked.
• Allow approx.6” (15cm) between fixture and other devices or a wall
for proper cooling.
• Always disconnect fixture from main power source before performing
any type of service and/or cleaning procedure.
• Only handle the power cord by the plug end. Never pull out the plug
by tugging the wire portion of the cord.
• During the initial operation of this fixture, a light smoke or smell may
emit from the interior of the fixture. This is a normal process and is
caused by excess paint in the interior of the casing burning off from the
heat associated with the lamp and will decrease gradually over time.
• Consistent operational breaks will ensure fixture will function properly
for many years .
• use the original packaging and materials to transport the fixture in for
service.
Bekijk gratis de handleiding van Brighter Pixel Strobe IP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Brighter |
| Model | Pixel Strobe IP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2834 MB |
