Bresser BR-S60RGB handleiding

36 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 7 van 36
7
*not included in the scope of delivery






-

1. Insert the NP-F970 battery* into the holder (8) at the edge opposite to the metal
contacts and then slide it towards the contacts so that the notches on the side of the
battery reach under the corresponding catches on the holder.
2. Move the on/off voltage selector switch (13) to the 'I' (DC) position to switch the
light on. The last setting is displayed on the LED screen and the light operates ac-
cording to the last setting.
3. To disconnect the power supply, move the on/off voltage selector switch (13) to the
'0' (off) position.
4. To remove the battery*, push the battery* gently to the right or left and pull it out
of the holder (8).





1. Slide the V-mount battery* into the V-shaped holder (16) from the right so that the
power contacts of the battery reach the voltage socket (7) on the opposite side.
2. Move the on/off voltage selector switch (13) to the 'I' (DC) position to switch the
light on. The last setting is displayed on the LED screen and the light operates ac-
cording to the last setting.
3. To disconnect the power supply, move the on/off voltage selector switch (13) to the
'0' (off) position.
4. To remove the battery*, press and hold the battery release button (14) and pull the
battery to the right out of the holder (16).


-


1. Insert the 2-pin power plug (22) of the power supply unit (21) into the 2-pin pow-
er connection socket (20) on the back of the light. Screw the knurled cap onto the
thread on the power connection socket.
2. Insert the C7 device plug (25) of the mains cable (24) into the C8 connection socket
(23) of the power supply unit.
3. Insert the Euro mains plug (26) into the power outlet (mains voltage: 100-240V).
4. Move the on/off voltage selector switch (13) to the 'II' (AC) position to switch the
GB

Bekijk gratis de handleiding van Bresser BR-S60RGB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkBresser
ModelBR-S60RGB
CategorieVerlichting
TaalNederlands
Grootte3002 MB