Bresser BR-S100B PRO handleiding
Handleiding
Je bekijkt pagina 4 van 12
1. Connect your DMX control panel* with the light through
the DMX sockets (10) by using a suitable RJ45 connection
cable*.
2. Turn on the light and the DMX control panel*.
2. Press the DMX/2.4G button. DMX function is enabled when
the corresponding indicator lights up. When DMX function
is enabled, the light can only be controlled through the
DMX control panel*.
1. Press the Power button (19) to switch on the unit.
2. Long press the Power button (19) to switch o the unit.
MOVING THROUGH THE MENU
Press the Menu button (21) to move through the menu.
Press 1x = shows 10 “Brightness” 10 = 10%
Press 2x = shows 56 “Colour temperature” 56 = 5600 K
Press 3x = shows 01 “Channel” 01 = 1
Selecting a channel
1. Press the Menu button (21) three times to go to the
channel menu.
2. Press + or – (20/22) to choose the desired channel.
3. Press the Menu button (21) to conrm your selection.
TURNING ON/OFF THE LIGHT
1. By default, the light status of the selected channel is
“OFF”.
2. Press the Power button (19) to turn the light on.
3. Long press the Power button (19) to turn o the light.
ADJUSTING THE BRIGHTNESS
1. By default, the brightness level is 10% when the device
is turned on.
2. Press + or – (20/22) to increase or decrease the brightness.
ADJUSTING THE COLOUR TEMPERATURE
1. Press the Menu button (21) to select the colour
temperature for the current channel.
2. Press + or – (20/22) to choose the desired colour
temperature.
1. Hold the light and slowly loosen the locking lever (4) for the
tilt joint.
2. Move the light head to the desired position and tighten the
locking lever (4) again hand-tight.
1. Loosen the xing screw (14) for the tripod connection (15)
so far that the opening of the tripod connection is exposed.
2. Place the light with the opening of the tripod connection
(15) on the spigot adapter* of a tripod* and tighten the
xing screw rmly.
*not included
Dispose of the packaging materials properly, according to their
type, such as paper or cardboard. Contact your local waste-
disposal service or environmental authority for information on
the proper disposal.
Do not dispose of electronic devices in the household garbage!
As per the Directive 2002/96/EC of the European Parliament on
waste electrical and electronic equipment and its adaptation
into German law, used electronic devices must be collected
separately and recycled in an environmentally friendly manner.
In accordance with the regulations concerning batteries and
rechargeable batteries, disposing of them in the normal
household waste is explicitly forbidden. Please make sure to
dispose of your used batteries as required by law — at a local
collection point or in the retail market. Disposal in domestic
waste violates the Battery Directive. Batteries that contain toxins
are marked with a sign and a chemical symbol.
Cd¹ Hg² Pb³
1
battery contains cadmium
2
battery contains mercury
3
battery contains lead
100W
9000LM
900 pcs
3200K-5600K
continous adjustment
0.2W SMD LED
≥95
10 - 100%
99 channels 2.4G wireless remote
control
>50M
YES, RJ45 interface
SONY BP V type series
DC13-19V
DC19V 4.7A GX16-2(plug)
300x300x46mm
Manual_F004599-F004603-F004604_BR-S100B-PRO_en-nl-de_BRESSER_v122021c.indb 4Manual_F004599-F004603-F004604_BR-S100B-PRO_en-nl-de_BRESSER_v122021c.indb 4 04.01.2022 09:54:0904.01.2022 09:54:09
Bekijk gratis de handleiding van Bresser BR-S100B PRO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bresser |
| Model | BR-S100B PRO |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1895 MB |