Bresser BR-135RGB handleiding
Handleiding
Je bekijkt pagina 8 van 28
8
*not included
3. In the FX mode, shortly press the CH/Mode knob (15) to switch between 20 different
special effects , ash speed or dimmer. Wheel the Adjustment/Bluetooth knob (16)
to select the desired special effect (see „FX Control (special effects)“) or to change
the settings for ash speed (1 to 9) or dimmer (0 to 100).
4. Press the CH/Mode knob (15) for about 5 seconds to switch to channel setting.
Wheel the Adjustment/Bluetooth knob (16) to select the desired channel (01 to 99)
FX Control ( special eects)
Welding / Pulsing / Campre / Lightning / Explosion / TV / Candle / Fault Bulb /
Breathe / Paparazzi / SOS / Flame / Fade / Cop Car / Party / Fireworks / Disco /
Ambulance / Fire Siren / RGB Loop
Overheating protection / Cooling fan
This light has an overheat protection. It is therefor equipped with an automatic
cooling fan which is controlled by a heatsensor. Once a critical temperature
is reached, the device will activate the coling fan automatically to provide an
overheating.
APP CONTROL
With the free "Smart Life" app, this and other devices can be controlled via a smart
device (e.g. tablet PC, smartphone).
To connect the studio light to a smart device and the app, follow these steps.
1. Use the link or QR code below to download the "Smart Life" app.
Note: To use the app, you need to register with a valid email address, which you will use
to receive an activation code. Give the app access to your local network and your
home's data, as well as the Bluetooth function, to ensure flawless functionality.
2. Turn on the studio light.
3. Press the Adjustment/Bluetooth knob (16) for about 5 seconds to enable the
Bluetooth connection for the studio light.
4. Activate Bluetooth on your smart device and launch the "Smart Life" app.
5. In the app select [Add device] under "Home" section.
6. Select the studio light from the list of available devices to connect it to your smart
device and the app.
Once the studio light is connected, you are able to control the device through the App.
Note:
If the connection failed, add the desired device manually through the App (select
one from "Add manually").
APP DOWNLOAD:
https://smartapp.tuya.com/smartlife
ADJUSTING THE TILT ANGLE
1. Hold the LED light and slowly loosen the locking screw (9) for the vertical axis (8).
2.
Move the light head to the desired position and tighten the locking screw (9) hand-tight.
Bekijk gratis de handleiding van Bresser BR-135RGB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bresser |
| Model | BR-135RGB |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 2419 MB |
