Bresser BR-100RGB handleiding
Handleiding
Je bekijkt pagina 8 van 28
8
2.4G Remote control*
1. Turn the knob to select the 001-099 channel in the mode of 2.4G remote control.
2. When DMX status is off, long pressing to reset bluetooth connection while using
mobile APP control (NOT in DMX mode).
POWER SUPPLY & TURNING ON/OFF
NOTE!
Never operate this device with rechargeable batteries or mains power supply simultaneously
to avoid any damages to the electronical parts. There is a risk of a short circuit!
Only operate the light with the recommended rechargeable batteries.
Depending on the respective model, the LED light can be equipped with one or two
battery holders.
Power supply with DC power connection
1. Put the 2-pins plug of the power cable in the power socket .
2. Put the Euro plug of the power cable in the power outlet.
3. Move the power knob to postion 'II' to turn on the light by using DC power supply.
4. Move the power knob to postion '0' to turn off the light.
Power supply with rechargeable V-mount batteries* (accessory depends on model)
1. Slowly slide the fully loaded rechargeable V-mount battery into the holder from
above until it snaps into place.
2.
Move the power knob to postion 'I' to turn on the light by using battery power supply.
3. Move the power knob to postion '0' to turn off the light.
APP CONTROL
With the free "Smart Life" app, this and other devices can be controlled via a smart
device (e.g. tablet PC, smartphone).
To connect the studio light to a smart device and the app, follow these steps.
1. Use the link or QR code below to download the "Smart Life" app.
Note: To use the app, you need to register with a valid email address, which you will use
to receive an activation code. Give the app access to your local network and your
home's data, as well as the Bluetooth function, to ensure flawless functionality.
2. Turn on the studio light.
3. Press for about 5 seconds to activate the Bluetooth connection for the studio light.
4. Activate Bluetooth on your smart device and launch the "Smart Life" app.
5. In the app select [Add device] under "Home" section.
6. Select the studio light from the list of available devices to connect it to your smart
device and the app.
Once the studio light is connected, you are able to control the device through the App.
Note:
If the connection failed, add the desired device manually through the App (select
one from "Add manually").
APP DOWNLOAD:
https://smartapp.tuya.com/smartlife
*not included
Bekijk gratis de handleiding van Bresser BR-100RGB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bresser |
| Model | BR-100RGB |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 2727 MB |
