Brecknell SBI-240 handleiding
Handleiding
Je bekijkt pagina 27 van 79
SBI-240 Service Manual 25
4. Press the TARE/PRESET key to confirm the entry.
5. When UNIT.KG is displayed, use the UNIT/DATA key to selec
t the weight
unit.
6.
Use the TARE/PRESET key to contin
ue.
7.
Press the ZERO/ON/OFF key to exit.
8. When the last stored unit-percentage-weight data is displayed (the default
value is 000
000), use the key to enter the new unit-percentage-
weight
9. Press the SETUP key for more than 4 second
s to enter the decimal point.
10. Press the TARE/PRESET key to confirm, save, and to return back to percent
weighing mode.
If the ca
lculated unit-percentage-weight is less than 0.5d, the indicator
will display Pct.Er and return back to percent weighing mode.
3.9.2 Using Weight Samples when Percentage is Known
1. Press the UNIT/DATA key when InP.Pct is displayed.
2.
Use the key to select SPL
.Pct, then press the TARE/PRESET
key to weigh samples (when the percentage is known), and to calculate the
piece weight.
3. Press ZERO/ON/OFF key to exit and return to percent weighing mode.
4. When SPL.Lo is displayed, remove all samples from the scale and press the
TARE/PRESET key to confirm.
5. Before the scale is stable, SPL.Lo will flash on the display. When the scal
e
beco
mes stable, continue to the ne
xt step.
6.
Press the ZERO/ON/OFF key to exit and return to percent weighing mode.
7. When SPL.Hi is displayed, place samples (when the percentage is known)
onto the scale.
8. Press the TARE/PRESET key to confirm reading we
ight. Before the scale is
st
able, SPL.Hi will flash on the display. When the scale becomes st
able,
continue to the next step.
9.
Press the ZERO/ON/OFF key to exit and return to percent weighing mode.
10. After INP.PCT is displayed quickly, the previously entered percent will be
displayed. (the default value is 000000, and the position of decimal po
int is
determined by CONFIG-FUNC-PERCEN
setti
ng,
Bekijk gratis de handleiding van Brecknell SBI-240, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Brecknell |
| Model | SBI-240 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9396 MB |
