Brecknell SBI-240 handleiding
Handleiding
Je bekijkt pagina 18 van 79
16 SBI-240 Service Manual
3.3 Turn the Indicator ON
Turn on the indicator by pressing the ZERO/ON/OFF key.
3.4 Turn the Indicator OFF
Turn the indicator off pressing and holding the ZERO/ON/OFF key for 4 seconds.
3.5 Navigating the Weigh Mode
3.5.1 Changing the Working Mode
Press and hold the [PRINT/FUNC] key, then use key to choose and
confirm to enter into weighing mode or counting mode.
3.5.2 Normal Weighing Mode
1. Turn on the indicator by pressing the ZERO/ON/OFF key.
If the display stabilizes but doesn't show zero, press the ZERO/ON/OFF
key to set a new zero point.
2. Place objects on the scale platform. The weight will be displayed.
3. To change the weight unit of measure, press the UNIT/DATA key.
4. To send data to another device via the serial port, press the PRINT/FUNC key.
3.5.3 Zero
If the display does not show 0 and there is no weight on the platform, press the ZERO/
ON/OFF key to zero the reading.
Zero range: ±2% * full Capacity.
The zero function is unavailable when the displayed reading is out of the zero range.
The indicator will show one of the following error messages:
0----- Over zero range
NOTE: Objects should be placed at the center of the platform. Corner or side loading
heavy objects may risk overloading an individual load cell and damage the scale.
NOTE: Under certain conditions, g and lb:oz are not available. In trade applications,
lb:oz should be prohibited. Please refer the following tables (3.3 and 3.4)
Bekijk gratis de handleiding van Brecknell SBI-240, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Brecknell |
| Model | SBI-240 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9396 MB |
