Brecknell SBI 210-LCD handleiding
Handleiding
Je bekijkt pagina 6 van 29
AWT35-100109 Rev AB 6/29
2 Introduction
The SBI 210-LCD is a general purpose, electronic weight indicator.
This indicator provides accurate weight on an easy-to-read LCD display, which can be mounted on
desk/pole stand/guide rail and powered using the included AC/DC power adaptor (6x AA batteries not
supplied).
2.1 Unpacking
Carefully take the scale out of its package, make it sure it’s not damaged, and all accessories are
included:
• SBI 210-LCD Indicator with 10 in (25 cm) interface cable, pole, and bench brackets
• 9 Vdc 600 mA Power supply with plug adaptor
• Installation Manual and Safety Sheet
2.2 General Installation Guidelines
To get the best performance from the scale, link the platform to the SBI 210-LCD indicator connector
and, place the scale in a location that will not degrade its accuracy.
• Try to avoid placing the scale in direct sunlight or near air vents
• Place the scale on a level flat surface. It is not advised to place the scale near vibrating machinery
• Avoid unstable power sources. Do not use near large users of electricity.
2.3 Powering ON/OFF the Scale
With the charger plugged into the indicator, press the ZERO/ON/OFF key to turn the scale on.
Press and hold the ZERO/ON/OFF key for 5s to turn the scale off.
Optional: remove the battery compartment lid on the rear to insert 6x AA batteries (not included).
2.4 Error Codes
0
----------
Initial zero weight over max load (default, 100% F.S.)
-----------
Overload, >1004.5 lb or >501.8 kg (default, 100% F.S. + 9 divisions)
EEP.E# Settings error #
Bekijk gratis de handleiding van Brecknell SBI 210-LCD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Brecknell |
| Model | SBI 210-LCD |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4092 MB |
